Want to drain/flush ECVT
#11
11-18-2020, 02:03 PM
Re: Want to drain/flush ECVT
i no longer have the pictures or the car, but from what i remember
TRY THIS LING
https://www.justanswer.com/nissan/8i...-4cyl-2-5.html
TRY THIS LING
https://www.justanswer.com/nissan/8i...-4cyl-2-5.html
#12
11-18-2020, 02:05 PM
Re: Want to drain/flush ECVT
Hi zan986 can I call you or email you? I'm really desperate to find the fill and drain nuts . And I can take pics of my car to show you... I looked at that listing before it didn't help me..
My email is 209creative@gmail.com
Thank you bro
My email is 209creative@gmail.com
Thank you bro
#14
11-18-2020, 02:13 PM
Re: Want to drain/flush ECVT
Hi that link didn't help. Could you describe in more details of where the holes are?
Should I remove the driver side wheel or passenger side wheel? Which side should I work on and the bolts facing?
Should I remove the driver side wheel or passenger side wheel? Which side should I work on and the bolts facing?
#17
01-26-2021, 02:57 PM
Re: Want to drain/flush ECVT
Thank you, Replaced the fluid, at 80k Miles, it was still Blackish Red, personally thought the fluid could've of lasted another 30k miles. Replaced 4.25 quarts of Matic W (60$ Total (5qts)). Rigged this contraption with a garden hose. When I was adding the Matic W ATF, it was dripping a little bit from the fill hole, so you have to go really slow. Nonetheless I took my time pouring the fluid in the funnel, it still dripped a little bit. So after pouring 4.5 quarts I had .25 quarts drip in the drain pain from fill hole that I placed underneath the car. 
2- eCVT Transfluid DRAIN plug
3- eCVT Coolant drain
#18
01-26-2021, 04:39 PM
Re: Want to drain/flush ECVT
Thank you, Replaced the fluid, at 80k Miles, it was still Blackish Red, personally thought the fluid could've of lasted another 30k miles. Replaced 4.25 quarts of Matic W (60$ Total (5qts)). Rigged this contraption with a garden hose. When I was adding the Matic W ATF, it was dripping a little bit from the fill hole, so you have to go really slow. Nonetheless I took my time pouring the fluid in the funnel, it still dripped a little bit. So after pouring 4.5 quarts I had .25 quarts drip in the drain pain from fill hole that I placed underneath the car.
#19
04-17-2024, 08:38 PM
Re: Want to drain/flush ECVT
The eCVT does use a special rated trans fluid , I just got mine straight from Dealer. The fill and drain plugs are about at 9 o'clock and 6 o'clock respectively. I think if you are down there you will see what I mean. I also ran across the coolant plug and finally checked the factory service manual. I highly recommend getting one if you plan t do work on this car as it helps you avoid the "extras" 
from the hybrid systems.
from the hybrid systems.
#20
04-17-2024, 08:40 PM
Re: Want to drain/flush ECVT
If i recall correctly, the perspective was using the drive shaft axle point as the center and going 9 and 6 oclock. I went looking for a pic but cant find one. I DO have a pdf of the HEV service if you need it... not sure if the site allows uploads though probably not with copyrights and all eh? I guess if you need it you can drop me a private message and I can find a way to shoot you over a diagram.
Thread
Topic Starter
Forum
Replies
Last Post
Mrazndea
Nissan Motors/Infiniti
2
12-05-2020 10:20 AM
rickyjoepr
HCH I-Specific Discussions
2
08-21-2012 08:55 AM
